Industrial Ethernet extender

DDW-220

The Wolverine DDW-220 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 5.7 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. The protocol transparent link allows any industrial protocol to pass unhindered ensuring the unit is easy to use.

Read more

With its robust aluminium housing, the DDW-220 is designed for use in heavy duty industrial applications. The wide power range and I/O fault contact make it ideal for easy installation and monitoring in industrial applications. The Transient Blocking Unit (TBU) is acknowledged as the most effective form of protection against damaging noise spikes caused by lightning or high voltage equipment.

Only industrial grade components are used which gives the DDW-220 an MTBF of 700,000 hours and ensures a long service life. A wide operating temperature range of –40 to +70°C (–40 to +158°F) can be achieved without the need for moving parts or cooling holes in the case. The DDW-220 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial environments.

The DDW-220 is designed for daisy chain applications over an SHDSL line. At each location, a local network can then be configured using the integrated L2 switch. The switches support QoS (Quality of Service) with four priority queues and strict priority scheduling as well as HoL (Head of Line Blocking Prevention).

Downloads

Technical data

DDW-220

Product description
StatusActive
Article number3642-0200
Ports4 x 10/100 Base-TX: RJ-45
DescriptionIndustrial Ethernet Extender
Warranty period5 Years
Approvals
Hazardous locationsATEX, EN 60079-0 and EN 60079-15. (Ex nA IIC T4 G)
FM Approvals, Class 1 Div 2
Standard compliance
SHDSLNEMKO, ITU-T G.991.2
Reliability prediction
MTBF, operating700 000 hours @ 25°C, MIL-HDBK- 217F
EMC (Electromagnetic Compatibility)
EN 61000-6-2Immunity industrial environments
EN 55024Immunity IT equipment
EN 61000-6-4Emission industrial environments
FCC part 15Class A
EN 50121-4Railway signalling and telecommunications apparatus
EMC specifications
EN 61000-4-2, ESDEnclosure contact, ± 6 kV
Enclosure air, ± 8 kV
IEC 61000-4-3, RF field AM modulatedEnclosure:
20 V/m 80% AM (1 kHz), 80 – 1000 MHz
10 V/m 80% AM (1 kHz), 1400 – 2100 MHz
5 V/m 80% AM (1 kHz), 2100 – 2500 MHz
1 V/m 80% AM (1 kHz), 2500 – 2700 MHz
EN 61000-4-4, fast transientsSignal ports, ± 2 kV
Power ports, ± 2 kV
EN 61000-4-5, surgeSignal ports balanced, ± 2 kV line to earth, ± 1 kV line to line
Power ports, ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunitySignal ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz
Power ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic fieldEnclosure, 300 A/m
EN 61000-4-9, pulsed magnetic fieldEnclosure, 300 A/m
EN 61000-4-16, Mains freq. 50 HzSignal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 HzSignal ports, 250 V 50 Hz line to line
EN 61000-4-29, voltage dips and interruptionDC power ports:
10 & 100 ms, interruption
10 ms, 30% reduction
10 ms, 60% reduction
+20% above & –20% below rated voltage
EN 55022, radiated RF emissionEnclosure, class A
FCC part 15, radiated RF emissionClass A
EN 55022, conducted emissionDC power ports, class B
Safety
SafetyEN 60950-1, IT equipment
EN 60950-1, dielectric strengthSignal port to other isolated ports, 1500 Vrms 50 Hz 1 min
Power port to other isolated ports, 1500 Vrms 50 Hz 1 min
Climatic
Temperature, operating–40 to +70°C (–40 to +158°F)
Temperature, storage–40 to +70°C (–40 to +158°F)
Maximum surface temperature135ºC (temperature class T4)
Humidity, operating5 to 95% relative humidity
Humidity, storage5 to 95% relative humidity
Enclosure
EnclosureUL 94, aluminium/zink, flammability class V-0
Dimensions (W x H x D)134 x 100 x 122 mm (5.25 x 3.93 x 4.80 in)
Weight1.5 kg
Degree of protectionIP 40
CoolingConvection
MountingHorizontal on 35 mm DIN-rail
Mechanical
IEC 60068-2-6, vibrationOperating, 7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shockOperating, 15 g, 11 ms
Interface specifications, power
Rated voltage20 to 48 VDC
Operating voltage16 to 60 VDC
Rated current300 mA @ 20 VDC
150 mA @ 48 VDC
Rated frequencyDC
Inrush current3.1 A2s
Startup current400 mA
PolarityReverse polarity protected
Redundant power inputYes
Isolation toEthernet, SHDSL
ConnectionDetachable screw terminal
Connector size0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cableNot required
Electrical specificationIEEE std 802.3 2000 Edition
Data rate10 Mbit/s, 100 Mbit/s, manual or auto
DuplexFull or half
Transmission range100 m / 328 ft
Isolation toPower, SHDSL
ConnectionRJ-45
Shielded cableNot required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails.
Number of ports4
Interface specifications, DSL
Electrical specificationITU-T G.991.2 Annex B
Data rate192 kbit/s to 5696 kbit/s
ProtocolEFM according to IEEE 802.3-2004
Transmission rangeAccording to ITU-T G.991.2 depending on the line quality
ProtectionOvercurrent / overvoltage protection circuit and varistor
Isolation toPower, Ethernet
ConnectionDetachable screw terminal
Connector size0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cableNot required
Number of ports2

Request a quote

Your contact information:
Your name:
Your company:
Your country:
Your telephone:
Your E-mail address:
Your message:
I would like to subscribe to your monthly newsletter
The subscription can be terminated at any time and your email address will not be forwarded or used for any other purpose.
You do not have JavaScript:

Industrial Ethernet extender

DDW-220